Forging Mold Release Agent

LP-2010B Forging Mold Release Agent

LP-2010B Release agent is water based graphite contain release agent for hot and cold forging process. The major function is to create a smooth film of separation between metal material being molded and the mold surface, mostly it provides efficient demoulding and lubrication performance to the released parts.

Chemical name:water based graphite

Product Features Of this Silicone New Material:

1. Excellent lubrication demoulding performance.

2. Good at thermal insulation and resistance.

3. Non-combustion in high temperatures,non-corroding,non harmful gas, reduce pollution, improve   the condition of working circumstance.

4. Improve forging quality, increase finished product integrity and reduce forging wastage.

5. Good at suspension property, uniformity film, and good adhesion.

Technical index

Application:

Hot and cold forging production of steel, cooper, brass, aluminum alloy, iron and other non-ferrous metals. This product also can be used for roll forging, die forging, gears precision forging and other general forging process.

Usage:

Stirring uniformity the stoste before using, and according to different process add different rate of water into stoste. Recommended dilution ratio is 1:10-20 with purified water,1kg release agent mixed with 10-20 kgs purified water. For complicated forging process, dilution ratio shall be reduced and tested by pratical production.

After diluted, use a brush or a spray gun to spray uniformly on the mould. Simple forging process or small fittings forging can applied the brush, but also need to brush uniformly.

Packing and storage:

Product need to be stored in the normal temperature, pay attention to extreme cold and heat, need to seal up after open to use. Stir well or shake well before use.

18 months from the date of manufacture.

28KG/Barrel 220KG/Drum

LP-2010B is not Silicone Mold Release agent.